TOKYO KEIKI SQP321-21-14-4-86CCC-18 SQP Series Triple Vane Pump

Recommended tightening torque for set screw:3.7 Nm; A2:25.9 mm; B1:30.9 mm; J:90 mm; G:M6x1; T min.:-20 °C; Weight:0.79 kg; C0:7.88 kN; e:2.5 mm; A1:9 mm;

Bearing Number:LSM190BR; Dimension V:0.1 in; Bolt Size:4 x M24; Cr - Dynamic Load Rating:138033 lbf; Shaft Size:190 mm; Bearing - Housing - Seal UPC:013992083999; Series Type:Light Series; Dimension T:21.0 in; Seal Type:High Temperature Pac; Dimension P:1.3 in;

a:21 mm; Dynamic load, C:30.7 kN; Min operating temperature, Tmin:-30 °C; D1:60.55 mm; Contact angle α:25 °; d1:47.4 mm; Characteristic rolling element frequency, BSF:4.64 Hz; Db max:65 mm; Characteristic inner ring frequency, BPFI:7.72 Hz; ra max:1 mm;

Number of Bearings:Double; Bearing Part Number:628; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; RoHS:6; Days to Ship:7 Days; Width T(mm):30 ～ 50; Type:Bearings with Housin; Bearing Retained:No;

Volume Discount:Available; RoHS:6; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Bearing Part Number:6200; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):54;

Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:Stainless Steel; Load Direction:Radial; B:14; Type:Ball; Size Standards:Metric System; Load Direction:Radial; Sealing Structure:Open Type; Type:Ball; Outer Ring Shape:Flat;

C:35.1 kN; B1:43.7 mm; N1:23 mm; C0:23.2 kN; d1:67.2 mm; H2:115 mm; H:57.2 mm; Dz:100 mm; Weight:2.85 kg; B:30.2 mm;

Plummer Block Dia., Type:Standard Shape; Unit, Type:Plummer Block; Plummer Block Type:Cutting in Two; Shaft diameter(φ):240; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore; Width a(mm):940; Unit Body Material:Gray Cast Iron (FC 2; Surface Treatment:No; Unit, Type:Plummer Block;

B:53.7 mm; d:61.91 mm; J:202 mm; T min.:-40 °C; G:R1/8"; Weight:3.42 kg; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN; N:18mm; Designation of bearing:US212-39G2T04;

Db - Cup Backface Backing Diameter:64.01 mm; K - Factor7:1.62; B - Cone Width:18.923 mm; R - Cone Backface To Clear Radius1:2.290 mm; da - Cone Frontface Backing Diameter:30.99 mm; Cone Part Number:26093; e - ISO Factor8:0.36; D:76.2 mm; Design Units:Imperial; Da - Cup Frontface Backing Diameter:66.

H3:100; d1:58 mm; A4:32 mm; C:29.6 kN; e:20 mm; G:R1/8"; B:29 mm; L:105 mm; N:14mm; B1:46 mm;

Cg - Geometry Factor:0.464; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:105000 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:721000 lbf; B - Cone Width:2.5625 in; Series:LL889000; C90 - Dynamic Radial Rating (90 million revolutions)5:107000 lbf; a - Effective Center Lo

G:R1/8"; Recommended tightening torque for set screw:3.7 Nm; N:11,5mm; Designation of housing:FLZ205-; S:17.4 mm; B1:44.3 mm; C:14 kN; C0:7.88 kN; A4:29 mm; H3:60;

Specifications/Environment:Standard; B:43; Basic Dynamic Load Rating(N):143000; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; Retainer Type:Punching; Type:Ball; Precision:Grade 0; RoHS:6; Load Direction:Radial;

Diameter series symbol:For Heavy Load; Grease Type:SH44M; Accessory:With cast iron cover; Days to Ship:8 Days; Fit:J7; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Surface Treatment:No; Stroke:No; Rolling Element Material:Bearing Steel;